Informazioni sul prodotto | |
|
| N. Articolo: C4270-22123.0105 N. Art. Produtt.: 22123.0105 EAN/GTIN: 4030618720737 |
| | |
|
| | |
| Questi otturatori vengono utilizzati per posizionamenti ripetibili di tavole girevoli o cursori. The index plunger with sensor makes it possible to monitor the indexing position of the indexing plunger. When it engages, the sensor already switches after 2/3 of the indexing distance l2. In addition to the electronic signal, the switching status is indicated directly on the sensor via an LED. Materiale Corpo Puntale - Acciaio inox 1.4305, nichelato
Pomello - Plastica PA 6, nero, opaco
Cavo Magnete Sensore - Plastica PA 6, nero, opaco
Dado - Acciaio inox A2 (ISO 8675)
Assemblaggio The enclosed separate sensor and sensor clip can be mounted with the enclosed Allen key. The derivation direction of the sensor cable can be determined individually. - Push the sensor into the side of the sensor clip.
- Tighten the internal hexagon screw of the sensor with light hand force (max. 0.1 Nm).
- Clip the sensor clip into the annular groove of the index plunger in any position.
- By turning the sensor clip, the sensor cable's derivation direction can be adjusted.
Note: To avoid interferences, no magnetic fields should act on the index plunger. Funzionamento Nella versione con arresto tirando il pomello e ruotandolo di 90°, il puntale viene bloccato in posizione retratta (il puntale non sporge). Note Pomello non smontabile. Il controdado è da ordinarsi separatamente. Altre informazioni: | | Dimensione nominale: | d1=5 mm / d2=M10 x 1 / l2 min.=8 mm | CE: | si | Conflict Minerals free: | Privo di minerali di conflitto | Prop65: | Contiene sostanze della Proposition 65 | REACH compliant: | Contiene sostanze SVHC >0,1% p/p | RoHS-compliant: | Conforme alla normativa RoHS | d1 [-0.02, -0.05]: | 5 mm | d2: | M10 x 1 | d3: | 19 mm | l1: | 46,5 mm | l2 min.: | 8 mm | l3: | 18 mm | l4: | 12,5 mm | F1: | 5 N | F2: | 18 N | SW: | 12 mm | Temperatura max.: | 75 °C | Temperatura min.: | -25 °C | Per esecuzione Fig.: | 2 | Corpo: | Acciaio inox 1.4305 | Cavo: | Termoplastica PUR, nera | Pomello: | Plastica PA 6, nero, opaco | Dado: | Acciaio inox A2 (ISO 8675) | Magnete: | Magnete permanente | Puntale: | Acciaio inox 1.4305, nichelato | Sensore: | Plastica PA 6, nero, opaco | Branca: | adattamenti, produzione di pezzi | costruzione di impianti, apparecchi e attrezzature | costruzione di veicoli ferroviari, ferrovia | tecnologia plastica / gomma | costruzioni e prodotti in metallo | Funzione: | bloccare | indicizzare | posizionare | fermare | scattare | regolare | Origine Preferenziale: | D | Peso: | 49 g |
|
| | |
| | | |
| |